Teac MT-20D-IO Maintenance Manual page 107

(4) Handling methods for FPC connector J9
(a) How to extract the FPC
Lift up the upper projection of the socket with the connector jig.
Then, grip FPC with the fingers, and extract it from the socket.
At this time, grip the reinforced portion of FPC. If any other
part than the reinforced portion is pulled forcibly, there is a
danger that FPC may be damaged.
(b) How to insert the FPC
While setting the groove of FPC to the partition of the socket,
insert FPC into the socket. Then, while depressing FPC to prevent
it from being disengaged from the socket, push in the top of the
socket with the finger.
After the completion of connection. lift FPC upward slightly with
the fingers, and check if the two are connected tight with each
other.
Connector jig
FPC
D
Connector J9
Fig. 406 Handling methods for connector J9
- 4014 -
Reinforced
portion
Groove