7011-2xx
Manual feed clutch assembly removal
1.
Remove the left side cover. See
2.
Place the MFP on its right side. Protect the cover from being marred.
3.
Remove the four screws (A) in the gear train metal cover.
4.
Remove the clip (B) from the shaft of the pick up clutch assembly.
5.
Remove the screw (C) and lever (pawl).
6.
Remove the clutch assembly. If the pieces come apart, they can be easily reassembled if necessary.
4-30
Service Manual
"Left side cover removal" on page
4-4.