Diagnostics Mode; Available Tests - Lexmark X203N Service Manual

7011-2xx

Diagnostics mode

When the Diagnostics mode is entered, each Diagnostics main menu item displays on the operator panel. When
a diagnostic test is selected from the main menu, a sub menu displays and each individual test displays in the
order shown. Any options that are referred to in the menus are displayed when the option is installed.

Available tests

The tests display on the operator panel in the order shown:
Diagnostics mode tests
REGISTRATION
Top Margin
Bottom Margin
Left Margin
Right Margin
Quick Test
PRINT TESTS
Tray 1
Manual Feeder (if installed)
Prt Quality Pgs
HARDWARE TESTS
Panel Test
Button Test
DRAM Test
INPUT TRAY TESTS
Feed Tests
OUTPUT BIN TESTS
Feed Tests
BASE SENSOR TEST
Exit
Front Door
Input
PRINTER SETUP
Defaults
Perm Page Count
Serial Number
Engine Setting 1 through 4
Model Name
Configuration ID
Edge to Edge
Enable Edge to Edge Copy
EP SETUP
EP Defaults
Fuser Temp
3-2
Service Manual
These tests are performed to adjust the print head registration. See
"Registration" on page 3-3
See "Quick test" on page
See "Print Tests" on page
See "Print quality test pages (Prt Quality Pgs)" on page
See "Panel Test" on page
See "Button Test" on page
See "DRAM Test" on page
See "Feed Tests" on page
See "Feed Tests" on page
See "Base Sensor Test" on page
See "Defaults" on page 3-7.
See "Perm Page Count" on page
See "Serial Number" on page
See "Engine Setting 1-4" on page
See "Model Name" on page
See "Configuration ID" on page
See "Edge to Edge" on page
See "Enable Edge to Edge Copy" on page
See "EP Defaults" on page
See "Fuser Temp" on page
3-4.
3-5.
3-5.
3-5.
3-6.
3-7.
3-7.
3-7.
3-7.
3-8.
3-8.
3-8.
3-8.
3-9.
3-9.
3-9.
3-9.
3-5.