Manual Feed Clutch Removal - Lexmark E360d Service Manual

Manual feed clutch removal

1.
Remove the left side cover. See
2.
Open the front access door, and disconnect the fuser link (A).
3.
Place the printer on its right side.
Note: Be careful to not mar the finish of the printer.
4.
Remove the four screws (B) from the main motor gear drive.
5.
Rotate the main motor gear drive enough to access the manual feed solenoid.
"Left side cover removal" on page
A
B
4513-420, -430
4-24.
Repair information
4-33