Quick Test - Lexmark X203N Service Manual

7011-2xx
Description
Left margin
Right margin
5.
Print another copy of the Quick Test to verify your changes.
6.
Continue changing the setting's by repeating steps 3 through 5.
To exit REGISTRATION, press Back (

Quick test

The Quick Test contains the following information:
•
Print registration setting's
•
Alignment diamonds at the left, right, top. and bottom
•
Horizontal lines to check for skew
•
General printer information, including current page count, serial number, and code level.
To print the Quick Test page:
Note: Print the Quick Test Page on letter or A4 paper.
1.
Select REGISTRATION from DIAGNOSTICS.
2.
Use or
The message Quick Test Printing... appears on the display.
Once the Quick Test Page completes printing, the Registration screen displays again.
3-4
Service Manual
Value
-50 to +50
Each increment corresponds to 4
pixels at 600 dpi (0.00666 in. or
0.1693 mm).
The default is 0.
-50 to +50
Each increment corresponds to an
approximate shift of 4 pixels at 600
dpi.
The default is 0.
)
.
Lexmark x54x
to select Quick Test, and press
Direction of change
A positive change moves the image to the left,
and a negative change moves the image to the
right. No compression or expansion occurs.
A positive change moves the image to the left,
and a negative change moves the image to the
right.
.