Lexmark X203N Service Manual page 44

7011-2xx
User status and attendance messages (Continued)
User primary message
Load Manual
<custom type>
Load Manual
<custom string>
Load Manual
<size>
Load Manual
<type> <size>
PJL OP Message
PJL Seed Message
PJL ST Message
Remove Paper ADF
Remove Paper
Standard Bin
30 Invalid Refill Change
Cartridge
31 Defective or Missing
Cartridge
32 Unsupported Toner
Cartridge
34 Short Paper
2-20
Service Manual
Printer does not detect media meeting the description <custom type> in the single
sheet feeder (manual feeder).
The following actions can be taken:
• Load paper, and the job continues.
• press Select ( ), and choose an alternate source for media.
• Cancel the current job.
Printer does not detect media meeting the description <custom string> in the
single sheet feeder (manual feeder).
The following actions can be taken:
• Load paper and the job continues.
• press Select ( ), and choose an alternate source for media.
• Cancel the current job.
Printer does not detect media meeting the description <size> in the single sheet
feeder (manual feeder).
The following actions can be taken:
• Load paper and the job continues.
• press Select ( ), and choose an alternate source for media.
• Cancel the current job.
Printer does not detect media meeting the description <type> and <size> in the
single sheet feeder (manual feeder).
The following actions can be taken:
• Load paper and the job continues.
• press Select ( ), and choose an alternate source for media.
• Cancel the current job.
Try one or more of the following:
• press Select ( ) to clear the message, and continue printing.
• Wait for the message to clear.
This posts when there is paper detected in the ADF upon POR or when the cover
is closed (or any other situation that re-inits the scanner). Message clears when
paper is removed.
The standard output bin is full or nearly full. Remove the media from the bin.
Refilled cartridge detected.
This message is displayed when a defective print cartridge is detected. Replace
the toner cartridge.
This message is displayed when an unsupported print cartridge is installed.
Replace the toner cartridge.
)
• press Select ( to clear the message and continue printing.
The printer does not automatically reprint the page that prompted the
message.
• Check tray length and width guides to ensure paper is properly fitted in the tray.
• Make sure the print job is requesting the correct size of paper.
• Adjust the Paper Size setting for the size paper you are using.
If MP Feeder Size is set to Universal, make sure the paper is large enough for
the formatted data.
• Cancel the current job.
Explanation