Fax Error Codes - Lexmark X203N Service Manual

7011-2xx

Fax error codes

Fax error log codes
Error code
000
200
3XX
4XX
5XX
6XX
7XX
800
802
803
804
805
808
809
80A
2-14
Service Manual
Description
No error occurred during fax
transmission
Error occurred when transmitting
training.
Error occurred when receiving image
data.
Error occurred when sending image
data.
Received unknown response from
remote fax device.
Error occurred when receiving a frame.
Error occurred when sending a frame.
Received EOT unexpectedly from the
modem in V34 mode.
Too many timeouts occurred during
ECM reception.
Fax canceled by user
Unexpectedly received a disconnect
command from the remote end.
Remote fax device failed to respond to
the DCS command.
T1 timeout occurred when trying to
establish a connection with a remote
fax device.
T2 Timeout occurred due to loss of
command/response synchronization.
T5 Timeout occurred when transmitting
image data to remote fax device.
Action
No action needed
• Check line quality.
• Select a lower 'Max Speed'.
• value under Fax Send setting's
• Adjust the transmit level.
• Check line quality.
• Adjust 'Receive Threshold'.
• Select a lower 'Max Speed' value
under Fax Receive setting's.
• Check line quality.
• Adjust 'Transmit Level'.
• Select a lower 'Max Speed' value
under Fax Receive setting's.
No action needed. Issue is with the other
device.
• Check line quality.
• Adjust 'Receive Threshold'.
• Check line quality.
• Adjust 'Transmit Level'.
• Select a lower 'Max Speed' value
under Fax Send setting's.
• If error persists disable V34 modulation
scheme.
• If error persists disable ECM mode.
No action needed.
• Check line quality.
• Adjust Transmit Level/Receive
Threshold values.
• Remote device could be requesting an
unsupported feature.
• Adjust Transmit Level/Receive
Threshold values.
• Remote device could be
malfunctioning.
• Adjust Transmit Level/Receive
Threshold values.
• Adjust Transmit Level/Receive
Threshold values.
• Check line quality.
• Adjust 'Transmit Level'.
• Select a lower 'Max Speed'value under
Fax Send setting's.