7011-2xx
Removal procedures
1.
Remove the toner cartridge and paper tray before removing other MFP parts. The toner cartridge should
be protected from light while out of the MFP.
2.
We recommend disconnecting all external cables from the MFP to prevent damage during service.
3.
Unless otherwise stated, re-install the parts in reverse order of removal.
4.
When re-installing a part held with several screws, start all screws before final tightening.
Covers
Front cover removal
1.
Open the front cover.
2.
Remove the screw securing the strap to the print engine frame.
3.
Place thumbs on the inside of the respective hinge.
4.
Force the left hinge out of its socket, and relax it above the socket.
5.
Force the right hinge out of its socket, and lift it above the socket.
4-2
Service Manual