Messages And Error Codes; Service Error Codes - Lexmark X203N Service Manual

Messages and error codes

Service error codes

Service error codes are generally non-recoverable except in an intermittent condition when you can POR the
MFP to temporarily recover from the error condition.
Error
8XX Scanner service errors
840.01 The scanner is disabled and can't be used.
Scanner
disabled
840.02 The scanner is disabled and can't be used.
Scanner
auto
disabled
Image Pipeline
841.00
Service image processing unit: AFE register mismatch
841.01
841.02
Service image processing unit: SCNCHN DMA
841.03
Service image processing unit: new line too soon
841.04
interrupt
Service image processing unit: tonal data overrun
841.07
Service image processing unit: image processing too
841.09
slow
System time out: SIZAR out of band interrupt
841.96
Service image processing unit: output data uncollected
841.97
Service image processing unit: SCNCHN DMA underrun
841.98
Service image processing unit interrupt handler delayed
841.99
crash
Scanner Failure. Communication failure
842
Scanner Failure: carriage failed to home or move to
843
desired position
Scanner Failure
843.01
Scanner Failure
843.02
Scanner Failure
843.03
Scanner Failure
843.04
Description Action
Enter the configuration menu, and re-enable the
scanner module. See "840.xx service check"
on page 2-41
This message is posted when the MFP PORs.
Enter the configuration menu, and re-enable the
scanner module. See "840.xx service check"
on page 2-41
Image pipeline ASIC. See
check" on page 2-24.
ADF mechanical failure. Go to
check" on page 2-23
General mechanical failure. Go to
check" on page 2-23
Pick Roller engage failure. Go to
check" on page 2-23
Pick roller disengage failure. Go to
check" on page 2-23
Diagnostic information
7011-2xx
"Flatbed service
"ADF service
"ADF service
"ADF service
"ADF service
2-9