Transfer Roll Removal - Lexmark X203N Service Manual

Transfer roll removal

Note: Handle the transfer roll as little as possible.
1.
Open the front access cover.
2.
Place a sheet of paper around the transfer roll to protect it.
3.
At the right side of the transfer roll, squeeze the holder arms with the left hand while lifting with the right.
Stop when the holder is unlatched.
4.
At the left side of the transfer roll, squeeze the holder arms with the right hand while lifting with the left
hand. Stop when the left holder is unlatched.
5.
With a hand at each end, lift the transfer roll out. The springs should remain in place.
Reinstallation note: Verify the springs are inserted into the bearings when re–installing.
7011-2xx
4-37
Repair information