Exerpeutic 1112 Owner's Manual page 14

Tool:
Allen Wrench 6mm
5. Back/Seat Support Bracket and Seat Sliding Tube Installation
Use 6mm Allen Wrench to remove eight Bolts (39) and eight Washers (40) from the Seat
Sliding Tube (15).
Insert the Seat Sliding Tube (15) into the Bushings (25) of the Rear Main Frame (26).
Attach the Back and Seat Support Bracket (17) onto the Seat Sliding Tube (15) with eight
Bolts (39) and eight Washers (40) that were removed. Tighten bolts with 6mm Allen
Wrench provided.
Adjust the seat position and insert the Side Triangle Knob (27), Bottom Triangle Knob (28),
and L Shape Knob (97). Turn all knobs in the clockwise direction to tighten.
ASSEMBLY
17 17
39 39 40 40
39 39 40 40
15 15
97 97
39 39
40 40
39 39
40 40
27 27
25 25 26 26
25 25
28 28
13
(27)
(28)