Exerpeutic 1112 Owner's Manual page 11

ASSEMBLY
Tool:
35 35
36 36
26 26
Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15
38 38
37 37
2. Rear Stabilizer Installation
Lift up the Rear Main Frame (26) towards the end, and then align the Rear Stabilizer (38)
onto the rear curve of the Rear Main Frame (26). Attach two Bolts (37) and on the other
ends of bolts with two Big Curve Washers (36) and two Cap Nuts (35). Hold the Rear
Stabilizer (38) to the Rear Main Frame (26) and use the Multi Hex Tool with Phillips
Screwdriver to tighten the Cap Nuts (35) until firm and secure.
Hardware:
(#35) Cap Nut
(#36) Big Curve Washer (#37) Bolt
2 PCS
2 PCS 2 PCS
10