Exerpeutic 1112 Owner's Manual page 12

3. Rear Main Frame Installation
Use 6mm Allen Wrench to remove six Bolts (39) and six Washers (40) from the Rear Main
Frame (26).
Connect the Extension Hand Pulse Sensor Wire I (29) from the Rear Main Frame (26) with
the Extension Hand Pulse Sensor Wire II (55) from the Front Main Frame (73). Insert the
Rear Main Frame (26) into Front Main Frame (73). Make sure the wires stay connected.
Tighten the six Bolts (39) and six Washers (40) by 6mm Allen Wrench.
ASSEMBLY
Tool:
Allen Wrench 6mm
26 26
40 40
29 29
40 40
40 40
39 39
39 39
11
39 39
55 55
73 73