Exerpeutic 1112 Owner's Manual page 13

ASSEMBLY
Tool:
16 16
23 23
24 24
Allen Wrench 5mm
24 24
21 21
17 17
18 18
19 19
Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15
4. Seat and Right/Left Handrail Support Tubes Installation
Use the Multi Hex Tool with Phillips Screwdriver to remove four Bolts (24) from the Back and
Seat Support Bracket (17).
Align and hold the Right Handrail Support Tube (21) onto the Back and Seat Support
Bracket (17), use the Multi Hex Tool with Phillips Screwdriver to tighten the Bolts (24) until
firm and secure.
Repeat the same assembly steps to the Left Handrail Support Tube (23).
Use 5mm Allen Wrench to remove four Big Washers (18) and four Bolts (19) from the Seat
(16).
Align and hold the Seat (16) onto the Back and Seat Support Bracket (17), use 5mm Allen
Wrench to tighten four Big Washers (18) and four Bolts (19) until firm and secure.
12