Greasing The Steering Head Bearing; Removing The Front Fender; Installing The Front Fender - KTM 250 EXC-F SIX DAYS EU Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.18

Greasing the steering head bearing

12.19

Removing the front fender

12.20

Installing the front fender

–
Mount and tighten screw
Guideline
Screw, top steering stem
Finishing work
–
Check the steering head bearing play. (
–
Remove the motorcycle from the lift stand. (
x
(EXC-F SIX DAYS)
–
Remove the lower triple clamp.
–
Install the lower triple clamp.
(EXC‑F EU, EXC‑F AUS, XCF‑W)
–
Remove the lower triple clamp.
–
Install the lower triple clamp.
800010-10
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
Remove screws
B01602-10
–
Remove screws
B01603-11
Main work
–
Position the front fender. Mount and tighten screws
Guideline
Remaining screws, chassis
B01602-10
.
2
M8
p. 64)
( p. 60)
x
( p. 63)
x
( p. 59)
x
( p. 61)
x
.
1
. Remove the front fender.
2
17 Nm Loctite
(12.5 lbf ft)
p. 56)
p. 98)
.
1
M6 10 Nm (7.4 lbf ft)
66
® 243™