App Setup Window - Cisco Video Surveillance 3000 Series Configuration Manual

Chapter 6 Application Manager
Table 6-2
Option
Installed License List Area
License list
Uninstall License
button

App Setup Window

The App Setup window lets you install, uninstall, configure, start, and stop apps, and perform related
operations.
The appropriate license must be installed on an IP camera before you install the app (see the
License Window" section on page
Some operations that you perform in the App Setup window can take several minutes to complete. Do
not turn off or restart the IP camera while an operation is in progress.
To display the App Setup window, perform the following steps:
Procedure
From the IP camera user interface, click the Setup link.
Step 1
Click Application Manager to expand the menu.
Step 2
From the Application Manager menu, click App Setup.
Step 3
Table 6-3
Table 6-3
Option
Application Installation Area
Application package
Browse button
Install button
OL-32285-01
App License Window Options (continued)
Description
Provides this information for each license that is installed on the IP camera:
License Type—Name of the license
•
Total—Number of corresponding license types that are currently
•
installed
Used—Number of corresponding license types that are in use
•
Free—Number of corresponding license types that are available
•
To remove all instances of a license, click the radio button that corresponds
to the license, click Uninstall License, and then click OK in the
confirmation dialog box
6-2).
describes the options in the App Setup window.
App License Window Options
Description
Name of the application to install.
Click to display a window that you can use to navigate to and choose the
application to install.
Click to install the application that is specified in the Application package
field.
Cisco Video Surveillance 3000 Series IP Camera Configuration Guide
App Setup Window
"App
6-3