Discovery Window - Cisco Video Surveillance 3000 Series Configuration Manual

Chapter 5 Network Setup
From the Network Setup menu, click Discovery.
Step 3
The Discovery window appears. If you change any options in this window, you must click the Save
button to save the changes. If you do not click this button, changes are not retained when you exit the
window. The Save button appears at the bottom of the window. You might need to scroll down to it.
Table 5-4
Table 5-4
Option
Cisco Discovery Protocol (CDP) Area
Show Neighbors button Displays a new window with information about CDP-enabled device
Bonjour Area
Enable Bonjour
Cisco Video Surveillance Media Server (VSMS) Area
Enable Preferred Media
Server List
Media Server IP address Enter the IP addresses for up to four VSMS to autodiscover your camera.
Medianet Window
The Media Services Interface (MSI) is a software component that is embedded in video endpoints and
collaboration applications. MSI ties the network to user devices and applications that enables an
end-to-end architecture called Cisco Medianet.
The Medianet window on the IP cameras contains the Enable Flow Meditate option. By default this
setting is enabled to allow metadata about the camera to be sent across the network and to the network
elements in the media path.
For more information about Medianet, refer to the Cisco Video Surveillance Operations Manager User
Guide at the following URL:
http://www.cisco.com/en/US/products/ps10818/products_user_guide_list.html
To display the Medianet window, perform the following steps:
From the IP camera user interface, click the Setup link.
Step 1
Click Network Setup to expand the menu.
Step 2
From the Network Setup menu, click Medianet.
Step 3
OL-32285-01
describes the options in the Discovery window.
Discovery Window Options
Description
neighbors in your network.
Check this check box if Bonjour is enabled in your network and you want the
IP camera to broadcast Bonjour discovery messages.
Check this check box if you want the camera to send discovery messages to
the media server list.
They are to be listed in order of preference, such that when VSMS 1 does not
respond to the camera's discovery request, the camera will send a registration
request to VSMS 2; and continue down the list until the camera is registered.
Cisco Video Surveillance 3000 Series IP Camera Configuration Guide
Medianet Window
5-7