Cisco Video Surveillance 3000 Series Configuration Manual page 46

Event Notification Window
Table 4-7
Option
Show From Address As Enter the e-mail address to be shown in the From field for the e-mail message
Subject
Attach Video Streaming
URL Address
Attach Snapshot
Attach Video Clip
FTP Notification Area
Primary FTP Server
Primary FTP Port
User Name
Password
Enable Passive Mode
Secondary FTP Server
Secondary FTP Port
User Name
Cisco Video Surveillance 3000 Series IP Camera Configuration Guide
4-22
Event Notification Window Options (continued)
Description
that is sent when an event occurs.
Enter the text to be shown in the Subject field for the e-mail messages that
the IP camera sends when events occur. The subject can contain up to 118
characters, including spaces.
Check this check box to include in the e-mail message body the URL from
which the recipient can access the live video stream from the camera on
which the event was detected.
Check this check box to include with the e-mail message a still picture from
the beginning of the event. This snapshot is stored on the IP camera until the
message is sent.
This functionality is available only when the secondary video stream is
enabled.
This option is available if the secondary video stream (H.264 only) is
enabled.
Check this check box and enter the following values to include with the
e-mail message a video clip of the event:
Pre-Capture Length—Enter the amount of video (in seconds) before
•
the event to include in the video clip.
The maximum pre-capture length is 5 seconds.
Note
• Post-Capture Length—Enter the amount of video (in seconds) after the
event to include in the video clip.
Note The maximum combined pre-capture and post-capture length is 10
seconds.
This video clip is stored on the IP camera until the message is sent.
Identify the primary FTP server to which snapshots or video clips are
uploaded by choosing IP Address or Hostname from the drop-down list and
entering the IP address or host name in the corresponding field.
Enter the port number that receives messages on the primary FTP server. The
default FTP port number is 21.
Enter the primary FTP server login user name.
Enter the primary FTP server login password.
Check this check box to enable the passive mode feature of the primary FTP
server.
Identify an optional secondary FTP server to which snapshots or video clips
are uploaded by choosing IP Address or Hostname from the drop-down list
and entering the IP address or host name in the corresponding field.
Enter the port number that receives messages on the secondary FTP server.
The default FTP port number is 21.
Enter the secondary FTP server login user name.
Chapter 4 Feature Setup
OL-32285-01