Table of Contents
Advertisement
Chapter 8
Log Configuration
Table 8-3
Log Messages
Message Name
INPUT_ONE_CHANGED
INPUT_ONE_RESET
INPUT_TWO_CHANGED
INPUT_TWO_RESET
IP_CONFLICT
IR_FILTER_DAY_AUTO
IR_FILTER_DAY_MANUAL
IR_FILTER_NIGHT_AUTO
IR_FILTER_NIGHT_MANUAL IR filter changed to night by user
LOG_IN
LOG_OUT
MOTION_DETECTED
MOTION_STOPPED
OUTPUT_ONE_RESET
OUTPUT_ONE_TRIGGERED
OUTPUT_TWO_RESET
OUTPUT_TWO_TRIGGERED
POWER_SUPPLY_FAILURE
SERVER_CONTACTED
OL-32285-01
Description that Appears in Log File
Input port one changed to <high/low>. Input port 1 on the IP camera changed
Input port one reset to <high/low>.
Input port two changed to <high/low>. Input port 2 on the IP camera changed
Input port two reset to <high/low>.
IP Address conflict for <IP address>.
IR filter changed to day automatically. The IP camera enabled its day filter
IR filter manually changed to day by
user <user> <IP address or hostname>.
IR filter changed to night
automatically.
<user> <IP address or hostname>.
User <user> <IP address or hostname>
logged in to <web server or SSH
server>.
User <user> <IP address or hostname>
logged out of <web server or SSH
server>.
Motion detected in region <region
index>.
Motion in region <region index>
stopped.
Output port one reset to <high/low>.
Output port one triggered to
<high/low>.
Output port two reset to <high/low>.
Output port two triggered to
<high/low>.
DC power supply failure.
Communication established with
<server type> server <server or
IP address>.
Cisco Video Surveillance 3000 Series IP Camera Configuration Guide
Explanation
state.
Input port 1 on the IP camera reset to
its default state.
state.
Input port 2 on the IP camera reset to
its default state.
IP camera experienced an IP address
conflict.
automatically.
The IP camera day filter was enabled
by a user.
The IP camera enabled its night filter
automatically.
The IP camera night filter was enabled
by a user.
A user logged in to the IP camera.
A user logged out of the IP camera.
The IP camera detected motion in its
video field.
The IP camera stopped detecting
motion in its video field.
Output port 1 on the IP camera reset to
its default state.
Output port 1 on the IP camera
changed state.
Output port 2 on the IP camera reset to
its default state.
Output port 2 on the IP camera
changed state.
The DC power for the IP camera failed. 2
The IP camera established
communication with an SNTP, DHCP,
Syslog, DNS, SMTP, HTTP, or 802.1x
server.
Local Log Window
Severity
5
5
5
5
4
6
6
6
6
5
5
5
5
5
5
5
5
6
8-7
Advertisement
Table of Contents
