Chapter 6
Application Manager
Managing Apps
The following sections provide detailed instructions for managing apps on an IP camera:
•
•
•
•
•
•
•
Installing a License for an App
The appropriate license must be installed on a camera before the corresponding app package is installed
on the camera.
To install a license on an IP camera, follow these steps:
Procedure
Obtain a valid app license from Cisco for the app and save the license file on your local PC or on a PC
Step 1
that you can access from your local PC.
From the IP camera user interface, click the Setup link, click Application Manager to expand the menu,
Step 2
then choose App License.
Click Browse next to the License file field and navigate to the license file that you saved.
Step 3
Select the license file and click Install License.
Step 4
Installing an App on an IP Camera
Before you can run an app on an IP camera, the app must be installed on the IP camera. To install an app,
perform the following steps.
Before You Begin
Install the appropriate license for the app on the IP camera as described in the
an App" section on page
Procedure
From the IP camera user interface, click the Setup link, click Application Manager to expend the menu,
Step 1
then choose App Setup.
OL-32285-01
Installing a License for an App, page 6-5
Configuring an App, page 6-6
Configuring Event Triggering, page 6-6
Running an App, page 6-7
Stopping an App, page 6-7
Uninstalling an App, page 6-8
Restoring the Application Manager, page 6-8
6-5.
Cisco Video Surveillance 3000 Series IP Camera Configuration Guide
Managing Apps
"Installing a License for
6-5