Cisco Video Surveillance 3000 Series Configuration Manual page 17

Chapter 3 Viewing Live Video
Table 3-1
Control
Audio Control
Enable/Disable
Speaker toggle button
Mute/Un-Mute
Microphone toggle
button
Restore button
Speaker Volume slider When the speaker is unmuted, drag this slider to adjust the volume at which
Microphone
Sensitivity slider
OL-32285-01
Camera Video & Control Window Controls (continued)
Description
Click the Disable Speaker button
camera to the PC that you are using. The button changes to the Enable Speaker
button .
Click the Enable Speaker button to unmute audio. The button changes to the
Disable button.
Click the Mute Microphone button
captured and sent to the IP camera from the internal or external microphone of
the PC that you are using. When you click this button, the speaker that is
attached to the IP camera does not play audio that is transmitted from your PC.
If you are simultaneously accessing other IP cameras in different
Note
browser sessions on the same PC, clicking this button in one browser
session does not mute the audio that the PC sends to the other IP
cameras.
When you click the Mute Microphone button, it changes to the Un-Mute
Microphone button
Click the Un-Mute Microphone button to unmute audio that is sent to the IP
camera. The button changes to the Mute Microphone button.
Resets audio controls to their default values.
your PC speakers play the audio from the IP camera, or enter a value from 0
through 100 in the field and press the Enter key.
The default value is 50.
Drag this slider to adjust the gain of the PC microphone (that is, how sensitive
it is to the audio that it picks up and that is sent to the IP camera), or enter a
value from 0 through 100 in the field and press the Enter key.
The default value is 50.
Cisco Video Surveillance 3000 Series IP Camera Configuration Guide
to mute audio that is sent from the IP
to mute the audio stream that is
.
3-3