Cisco Video Surveillance 3000 Series Configuration Manual page 54

Local Storage
Table 4-9
Option
Download
Delete
Refresh
Cancel
Cisco Video Surveillance 3000 Series IP Camera Configuration Guide
4-30
Local Storage Window Options (continued)
Description
To download a video recording to your local drive or a network drive, check
the Select check box for the recording that you want, then click the
Download button. Follow the on-screen prompts to save the recording.
When you save a recording, the system creates a directory called
Recordings_TimeStamp in the location that you choose and saves recordings
in that directory. If the recording that you download contains more than 10
minutes of video, the system divides the recording into separate files that
contains 10 minutes of video each.
Network-loss recordings that are created on an IP camera that is
Note
running firmware 2.0.0 cannot be downloaded with the 1.4.1 SD
utility.
To delete a video recording from the SD or MicroSD card in the IP camera,
check the Select check box for the recording that you want, then click the
Delete button.
You can quickly select all video recordings in the list by right-clicking in the
Recordings list and then choosing Select All.
To refresh the list of video recording so that the list shows the latest
information about the recordings on the SD or MicroSD card in the IP
camera, click the Refresh button.
This button appears when a video recording is downloading. To cancel the
download operation, click the Cancel button.
Chapter 4 Feature Setup
OL-32285-01