Table of Contents
Advertisement
Log Configuration
The Log windows let you set up and view the IP camera log file, which captures information about the
IP camera and its activities.
The IP camera stores the log file in its internal SDRAM. If the SDRAM becomes full, the IP camera
begins to overwrite existing information. To avoid losing log information, you can configure the IP
camera to send log information to a Syslog server.
Caution
Because the logs are stored in the internal camera SDRAM, all existing logs in the camera are lost after
a camera reboot, power-up, or power-down.
The following sections describe the Log windows in detail:
•
•
Log Setup Window
The Log Setup window provides options for configuring the log file and an optional Syslog server on
which to store log files.
To display the Log Setup window, perform the following steps:
Procedure
From the IP camera user interface, click the Setup link.
Step 1
Click Log to expand the menu.
Step 2
From the Log menu, click Setup.
Step 3
The Log Setup window appears. If you change any options in this window, you must click the Save
button to save the changes. If you do not click this button, changes are not retained when you exit the
window. The Save button appears at the bottom of the window. You might need to scroll down to it.
Table 8-1
OL-32285-01
Log Setup Window, page 8-1
Local Log Window, page 8-4
describes the options in the Log Setup window.
C H A P T E R
Cisco Video Surveillance 3000 Series IP Camera Configuration Guide
8
8-1
Advertisement
Table of Contents
