Maintenance Window - Cisco Video Surveillance 3000 Series Configuration Manual

Maintenance Window

Table 7-2
Option
User List Area
User Name
Password
Confirm Password
Privilege Level
Change button
Add button
Delete button
Maintenance Window
The Maintenance window provides options for setting or restarting the IP camera, saving configuration
information from the IP camera, and uploading the configuration information to the IP camera.
Saving and uploading configuration is useful for these activities:
•
•
To display the Maintenance window, perform the following steps:
Cisco Video Surveillance 3000 Series IP Camera Configuration Guide
7-4
User Window Options
Description
Enter a unique name for the user.
The user name is case sensitive and can include up to 32 letters, numbers,
and special characters, but no spaces. Special characters are: ! % ( ) + , - =
@ _ ~
There is always one user named admin (all lower case), which cannot be
deleted.
Enter a password for the user.
The password is case sensitive and must contain from 8 to 32 characters,
which can be letters, numbers, and special characters, but no spaces. Special
characters are: ! $ ( ) - . @ ^ _ ` { } ~
Re-enter the password for the user.
Select the desired privilege level for the user:
•
•
Click this button to change the password of the corresponding user.
Click this button to add the corresponding user. That user can then log in to
the IP camera.
Click this button to remove the corresponding user. This user can no longer
log in to the IP camera.
Configuring multiple IP cameras—If your network includes several IP cameras that should have
similar configurations, you can configure one IP camera, save that configuration, and upload it to
other IP cameras. Then, instead of manually configuring all options on each IP camera, you
manually configure only the options that are unique, such as the IP address, if not obtained from
DHCP.
Backing up configuration—If you save the configuration from the IP camera, you can upload it to
the IP camera to restore the configuration if it is lost, or if you can upload it to a replacement IP
camera, if needed.
Administrator—Can access all IP camera windows, features, and
functions.
Viewer—Can access the Camera Video & Control window with limited
controls, and can access the Refresh, Logout, About, and Help links
from that window.
Chapter 7 Administration
OL-32285-01