Cisco Video Surveillance 3000 Series Configuration Manual page 63

Chapter 5 Network Setup
Table 5-6
Option
Secondary Trap
Receiver
SNMP v3 Area
Enable SNMP v3
Use Default Local
Engine ID
Manually Configure
Local Engine ID
Primary Trap Receiver
Secondary Trap
Receiver
User #
User Name
Authentication Method
Authentication
Password
OL-32285-01
SNMP Window Options (continued)
Description
Identify an optional secondary trap receiver of the SNMP v2c manager by
choosing IP Address or Hostname from the drop-down list and entering the
IP address or host name in the corresponding field.
Check this check box to enable SNMP v3.
Click this radio button if you want to use the default local engine ID for
SNMP.
The default local engine ID is 8000000903<MAC>, where <MAC> is the
MAC address of the IP camera.
Click this radio button if you want to enter a local engine ID manually, then
enter a unique local engine ID.
Enter this information in a standard format as defined in RFC3411. Valid
formats include (but are not limited to) the following:
8000000903<MAC>
•
where <MAC> is the MAC address of the IP camera. For example, if the
IP camera MAC address is 00:04:9F:11:22:33, enter
800000090300049F112233. This format is the default.
8000000901<IPv4_address_hex>
•
where <IPv4_address_hex> is the IPv4 address of the IP camera in
hexadecimal format. For example, if the IP camera IPv4 address is
192.168.0.100, enter 8000000901C0A80064.
• 8000000904<text>
where <text> is a string of up to 54 characters.
Identify the primary trap receiver of the SNMP v3 manager by choosing IP
Address or Hostname from the drop-down list and entering the IP address
or host name in the corresponding field.
Identify an optional secondary trap receiver of the SNMP v3 manager by
choosing IP Address or Hostname from the drop-down list and entering the
IP address or host name in the corresponding field.
Display only. Lists the user number of each IP camera user who is configured
with the administrator privilege level.
Display only. Displays the name that is associated with the corresponding
user number
Choose the authentication protocol for SNMP v3 messages that are sent on
behalf of the corresponding user.
Enter a password for the authentication protocol for SNMP v3 messages that
are sent on behalf of the corresponding user.
This password can contain from 8 to 63 characters, which can be letters,
numbers, and special characters, but no spaces. Special characters are: ! $ (
) - . @ ^ _ ` { } ~
Cisco Video Surveillance 3000 Series IP Camera Configuration Guide
SNMP Window
5-9