Table of Contents
Advertisement
Understanding the IP Camera User Interface
Table 1-2
Field
Subnet Mask
Gateway Address
Primary DNS
Secondary DNS
IO Port Status
Input Port 1
Output Port 1
Stream 1 and Stream 2
User
IP Address
Start Time
Elapsed Time
Codec
Cisco Video Surveillance 3000 Series IP Camera Configuration Guide
1-6
Home Window Information (continued)
Description
Subnet mask of the LAN to which the IP camera is connected. To configure
the subnet mask, see the
IP address of the gateway through which the IP camera is connected. To
configure this IP address, see the
page
5-3.
IP address of the primary DNS server, if configured for the IP camera. To
configure a primary DNS server, see the
page
5-3.
IP address of the secondary DNS server, if configured for the IP camera. To
configure a secondary DNS server, see the
on page
5-3.
Current state of input port 1 on the IP camera.
Current state of output port 1 on the IP camera.
IP camera user name of each user who is accessing the primary video stream
(Stream 1) or the secondary video stream (Stream 2) through a client PC or
a third-party device.
By default, users appear in order of start time. To display users in ascending
order of any information in any corresponding column, click the column
heading. Click a column heading again to reverse the display order.
IP address of the client device.
Time and date that the client accessed the video stream for this session.
Length of time that the client has been accessing the video stream.
Video codec (H.264 or MJPEG) being used for the stream,
"IP Addressing Window" section on page
"IP Addressing Window" section on
"IP Addressing Window" section on
"IP Addressing Window" section
Chapter 1
Overview
5-3.
OL-32285-01
Advertisement
Table of Contents
