Ces Scale - Epson DFX-9000 Service Manual

Epson DFX 9000

4.2.4.6 CES SCALE

Do not touch the PRINT HEAD immediately after using
W A R N I N G
the printer, or you may burn your hand. Allow the head to
cool enough to work with it.
1. Remove the UPPER UNIT (p. 135)
2. Tilt up the rear of the PR MECHA ASY and keep it in place with the
tilt bar. Refer to section 4.2.4.1 PR MECHA ASY, p. 149.
3. Release the Tension Spring, located at the right end of the CES
SCALE, from the tab on the SIDE FRAME, RIGHT, and release the
CES SCALE.
Disassembly and Assembly
CES SCALE
Figure 4-37. CES SCALE Removal (1)
CES SCALE
Revision B
3)
Tension spring
159