Paper Is Not Fed Or Ejected Properly; Line Spaces Become Narrow; The Paper Is Fed Skewed - Epson DFX-9000 Service Manual

Epson DFX 9000
Paper feed related failure

Paper is not fed or ejected properly.

Line spaces become narrow.

The paper is fed skewed.

Troubleshooting
Troubleshooting procedure
1. Perform the TOF sensor sensitivity adjustment
Sensor - part of the CARD GUIDE ASY
2. Check the TPE (Top Paper Empty) Sensor, and its connection to CNTPE on the
Sensor Board. See Figure 4-13. SENSOR BOARD UNIT Removal (1)
If necessary, replace the TPE HOLDER ASY
3. Check all cable connections on the Sensor Board. See
BOARD UNIT Removal (1)
4. Replace the ROM BOARD
1. Verify that the paper is within specifications. See
2. Check and if necessary replace the
3. Replace the POWER UNIT
4. Replace the ROM BOARD
1. Verify that the paper is within all specifications. See
(p.13). Make sure the paper is mounted correctly and evenly in the tractors.
2. Use SelecType to change the settings for manual
(p.10).
3. Adjust the platen gap adjustment. The following adjustments affect the platen
gap: the APTC thickness detection adjustment
position adjustment (p.241).
4. Reinstall the CARD GUIDE ASY
position adjustment (p.227).
Troubleshooting
(p.235), or replace the TOF
(p.153).
(p.201).
Figure 4-13. SENSOR
(p.140).
(p.137).
Paper specifications
LF MOTOR (p.161).
(p.136).
(p.137).
1.2.6 Paper specifications
Platen gap setting (SelecType)
(p.238), and the
(p.153), and perform the
Revision B
(p.140).
(p.13).
APTC detection
Card guide mount
120