Sensor Board Unit - Epson DFX-9000 Service Manual

Epson DFX 9000

4.2.3.3 SENSOR BOARD UNIT

Disconnect the power cable and wait at least 5 minutes for
W A R N I N G
capacitors to drain before disassembling the POWER
UNIT. If you touch the POWER UNIT with the power
supplied, you may receive an electric shock.
When removing or installing the SENSOR BOARD UNIT,
C A U T I O N
handle the Cable M with care. There is a ferrite core
attached to it for electromagnetic interference protection.
1. Remove the PR MECHA ASY (p. 149)
2. Disconnect all the cables except Cable M and Cable S from the
SENSOR BOARD UNIT. See the connector map,
page 140.
Disassembly and Assembly
Figure 4-13 on
SENSOR BOARD UNIT
Revision B
139