The Paper Feed Position Is Incorrect - Epson DFX-9000 Service Manual

Serial impact dot matrix printer
Hide thumbs Also See for DFX-9000:
Table of Contents

Advertisement

Epson DFX 9000
Paper feed related failure
The printer does not feed continuous forms from the
Front or Rear.
The Paper Path does not switch properly.

The paper feed position is incorrect.

Front-feed continuous forms will not feed backward.
Rear-feed continuous forms will not feed backward.
Troubleshooting
Troubleshooting procedure
1. Check and replace the
LF MOTOR
2. Check and replace the
ROM BOARD
1. Check and replace the
HCPP SENSOR UNIT
2. Check and replace the
HCPP MOTOR
3. Check and replace the
PR MECHA ASY
4. ROM BOARD failure. Replace the
1. Something may be wrong with the paper. Verify that the paper meets the
specifications (p.13)
in Chapter 1.
2. Check the SelecType settings for Page length for the front and rear tractors. See
Table 1-35. Setting values available in Selectype
NOTE: Page length settings in application software generally override
SelecType settings, so check the application software settings if applicable.
3. Use the Panel Buttons to adjust the automatic loading position. See
(p.45).
4. Perform the
TOF sensor sensitivity adjustment
defective, replace the
CARD GUIDE ASY
5. If the paper feed position problem occurs with paper feed from the front, check
the FTRPE (Front Tractor Paper Empty) Sensor. If the sensor has failed, replace
the Front-Left tractor. See
TRACTOR FL UNIT/TRACTOR FR UNIT
6. If the paper feed position problem occurs with paper feed from the rear, check
the RTRPE (Rear Tractor Paper Empty) Sensor. If the sensor has failed, replace
the Rear-Left tractor. See
TRACTOR RL UNIT/TRACTOR RR UNIT
Check the FTRPE (Front Tractor Paper Empty) Sensor and front tractor units. If
necessary, replace the
TRACTOR FL UNIT/TRACTOR FR UNIT
Check the RTRPE (Rear Tractor Paper Empty) Sensor and rear tractor units. If
necessary, replace the
TRACTOR FL UNIT/TRACTOR FR UNIT
Troubleshooting
(p.161).
(p.137).
(p.205).
(p.168).
(p.149).
ROM BOARD
(p.137).
(p.48).
(p.235). If the TOF sensor is
(p.153).
(p.170).
(p.170).
Revision B
Paper
Top of Form
(p.170).
(p.172).
119

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents