Epson DFX-9000 Service Manual page 157

Epson DFX 9000
4. Disconnect the cables shown in
BOARD.
Connector Pins Color
CNRHD1 22 White
CNRHD2 22 White
CNFHD1 22 White
CNFHD2 22 White
CNHD3 22 White
CNSEN1 28 White
CNSEN2 26 White
CNSPHS 7 White
CNSPM 3 White
CNINLK 4 White
CNLF 6 White
5. To remove the PR MECHA ASY, grab either pair of opposite corner
lift handles, and lift it straight up.
Lift the PR MECHA ASY with great care so that the
C A U T I O N
plastic lift handles do not come off the side frame.
Reconnect all connectors securely.
Tuck the cables into the PR MECHA ASY properly so
that they are not caught on the PR MECHA ASY. Make
sure the ferrite core does not put pressure on parts
around it.
Disassembly and Assembly
Figure 4-24 from the ROM
Connects to / Function
Carrier PCB
(Front PRINT HEAD L, R)
(Rear PRINT HEAD L, R)
Carrier PCB (Sensor)
SENSOR BOARD UNIT
SENSOR BOARD UNIT
SP MOTOR IC
SP MOTOR
INLK SW
LF MOTOR
Tuck in
CNSEN1
CNSPM
CNRHD1
FRONT
ROM BOARD
REAR
Figure 4-24. PR MECHA ASY Removal (2)
PR MECHA ASY
CNSPHS CNRHD1 CNRHD2
Tuck in
CNINLK
CNRHD2 CNFHD1 CNFHD2
CNSPHS CNSEN1 CNSPM
Revision B
CNFHD1
CNFHD2
CNHD3
CNSEN2
CNLF
CNHD3 CNSEN2
CNLF
CNINLK
150