Epson DFX 9000
5.1 Adjustment overview
5.1.1 Required adjustments
This section describes the adjustments required after certain parts are removed or replaced.
the corresponding adjustments required.
Numbers in cells show the adjustment order.
A numbered cell with no shading indicates an adjustment that must be made only if the part is replaced with a new part.
A yellow-shaded cell indicates an adjustment that is needed if the part is removed and put back, or replaced with a new part.
"-" in a cell means that the adjustment is not required.
Adjustment
Table 5-1
Adjustment overview
below shows the parts removed or replaced, and
Revision B
212