Epson DFX 9000
3. Pinch the locking tabs on the four L-Cap spacers that secure the
SENSOR BOARD UNIT to the bottom rear of the printer, and
remove the SENSOR BOARD UNIT.
Do not install the SENSOR BOARD UNIT upside
down or reversed.
Be sure all cables are reconnected securely.
Disassembly and Assembly
L-Cap spacer
3)-1
Figure 4-14. SENSOR BOARD UNIT Removal (2)
SENSOR BOARD UNIT
3)-1
3)-2
Bottom of
the Printer
SENSOR BOARD UNIT
Revision B
3)-3
141