Adjustment - Epson DFX-9000 Service Manual

Epson DFX 9000
15. Slowly feed the CARRIER CABLE UNIT inward toward the Carrier
Unit through the holes of the SIDE FRAME, RIGHT. (2 places)
16. Remove the CARRIER UNIT together with the CARRIER CABLE
UNIT and the SP BELT.
15)-2
Feed to the inside.
CARRIER CABLE UNIT
Figure 4-78. CARRIER UNIT Removal (2)
Disassembly and Assembly
16)
CARRIER UNIT
15)-1
Pull out of the printer.
After removing or replacing the CARRIER UNIT, be sure
A D J U S T M E N T
R E Q U I R E D
to perform the following maintenance and adjustments.
1. Lubricate the oil felt on the Carrier Unit,
page 267
2. CR drive belt (SP BELT) tension adjustment (p.
3. Card guide mount position adjustment (p. 227)
4. LF Drive Belt Tension Adjustment (p. 222)
5. TOF sensor sensitivity adjustment (p. 235)
6. APTC thickness detection adjustment (p. 238)
7. APTC detection position adjustment (p. 241)
8. Top margin adjustment (p. 245)
9. Left margin adjustment (p. 247)
10. Bi-D adjustment (p. 250)
CARRIER UNIT
Revision B
Figure 6-10 on
220).
194