Kantronics KPC–3 Plus User Manual page 82

Messages entered from the local keyboard connected to the TNC do not require editing
in order to be reverse forwarded, but must include at least an @BBS field to enable the
reverse forwarding.
Listing Messages
When you list messages with any of the LIST commands, you will get a display similar
to the one shown below. If you specify the optional semi-colon (;) you will also see the
@BBS field (if it exists) in square braces after each line.
MSG# ST
6
4
3
2
1
9712 BYTES AVAILABLE
NEXT MESSAGE NUMBER 7
ENTER COMMAND: B,J,K,L,R,S, or Help
The message number (MSG#) is listed, followed by the STATUS of the message. This
status includes the message type (B=Bulletin, T=NTS traffic, and P=Personal
message). The second character in the ST column is the current status of the message.
A Bulletin status (type B) can be:
F—it has already been forwarded to another full-service BBS
H—it is being held for review by the SYSOP because it was entered into the
PBBS over the radio.
An NTS traffic message (type T) may have a status of:
H—indicating that it is being held for review by the SYSOP before it may be
forwarded.
The Private message (type P) can have the following status characters in the second
position:
H—This is a personal message that has an @BBS field but is being held for
review by the SYSOP before it may be forwarded.
N—This message is a Personal message that has not been forwarded and has
not been read by the station it is addressed to. If it is forwarded to a full-service
BBS, it will be deleted if PBKILLFW is ON.
Y—This message has been read by the station it is addressed to, but has not
been killed. It will not be forwarded even if it has an @BBS since it has already
been read.
SIZE TO
B 45 KEPS W3IWI
B 26 HELP WB5BBW
T 38 66044 WØOUU
PN 14 NØAPJ WØSC
B 30 ALL
FROM DATE
12/19/91 09:37:11
12/19/91 09:34:05
12/19/91 09:33:42
12/19/91 09:33:27
NØKN 12/19/91 09:32:49
82
SUBJECT
2 Line Element set
Xerox 820
QTC Lawrence 913/842
AMTOR
Need help on AMTOR