Kantronics KPC–3 Plus User Manual page 184

text string. A station that connects will be sent a series of numbers that must be
decoded according to RTEXT.
See also: rtext; remote access section
NDHEARD [SHORT | LONG | CLEAR]
immediate
This command allows the operator to display a list of nodes whose ID packets have
been heard by the TNC. The list includes KA-Nodes as well as K-Net, TheNet,
NET/ROM and G8BPQ nodes.
K-Net, TheNet, NET/ROM and G8BPQ nodes are identified as:
ALIAS (CALLSIGN)
and Kantronics' KA-Nodes will be identified as:
MYNODE (MYCALL)
An asterisk "*" indicates that the station was heard through a digipeater. The date/time
the station was last heard is also displayed. If the S option is used, i.e. NDHEARD S,
then only the callsigns of the stations heard will be displayed. If the L option is selected,
all callsigns contained in the received packet are displayed (see MHEARD for display
format). If the C option is used, the list of nodes is cleared.
See also: mynode
NDWILD {ON | OFF}
default OFF
When OFF, the KA-Node will only recognize connect requests directed to the MYNODE
call. When ON, connect requests to any SSID of the MYNODE call will be recognized
as connects to the KA-Node, if that SSID is not being used for any other ID in the TNC.
See also: myalias, mycall, mynode, mypbbs, myremote
NETALIAS xxxxxx
default {blank}
The NETALIAS is an optional mnemonic that usually provides information about the
location of the node. It exists only for the convenience of users. Network nodes
automatically convert the NETALIAS to the associated NETCALL when setting up a
circuit for a user. Changing or entering NETALIAS will not cause a soft reset.
(up to 6 alpha-numeric characters)
184