Kantronics KPC–3 Plus User Manual page 63

Once the connection has been made, you'll receive a message back on your
Step 3.
screen from the KPC-3 Plus that says *** CONNECTED to KBØNYK (or, if
you are using relay stations, *** CONNECTED to KBØNYK via WØXI,
NØGRG). At that point you are ready to start talking to the other station since
the KPC-3 Plus has already automatically switched into the CONVERS mode.
Step 4. After you have completed your conversation, simply press <Ctrl+C> to return
your KPC-3 Plus to the command mode (―cmd:‖ will be displayed) and then
you can instruct your KPC-3 Plus to disconnect as you did above with the
mailbox, by entering D (or the full form, DISCONNE) and return.
As you begin working with your KPC-3 Plus packet radio station, other topics that you
may wish to explore (with the help of other sections of this manual) include:
doing hard and soft resets,
communicating via relays with a distant station,
using network nodes, and
working with a GPS device.
This concludes a quick tour of basic uses of your KPC-3 Plus. With just these basics,
you can do a lot, but you have a great deal more power if you want to explore the full
possibilities.
For more information on all the topics we have covered here, and more, see the
following chapters in this manual.
63