Kantronics KPC–3 Plus User Manual page 79

Using the LC command by itself will cause the PBBS to list the TO field of all
BULLETINS in the mailbox. This will just be a list of the actual TO fields, and not a list of
the messages. If you specify a category (i.e. LC RACES) the PBBS will list the full
message headers of all BULLETINS addressed to that category.
LL n [ ; ]
Lists the most recent n number of messages in the mailbox. Again, only BULLETINS,
TRAFFIC, and PRIVATE, which you are allowed to read, will be listed.
LM(ine) [ ; ]
Lists all messages in the mailbox which are addressed to you.
LO [+|-]
This command allows you to change the order in which messages are listed. When set
to +, the messages are listed in ascending numerical order (oldest to newest). When
this command is set to ―-‖, the messages will be listed starting with the highest message
number (newest to oldest). This command will not be available if the SYSOP has the
PBLO command in his TNC set to FIXED.
LT [ ; ]
Causes the PBBS to list all TRAFFIC messages that are currently in the PBBS.
K(ill) n
Deletes message number n from the mailbox. You may only delete TRAFFIC
messages, PRIVATE messages addressed TO or FROM you, or BULLETINS you sent.
The SYSOP may delete any message, including BULLETINS.
KM(ine)
Deletes any messages in the PBBS addressed to you that you have read. If you have
not read a message addressed to you, it will not be deleted.
NL n
The NL (number of lines) command controls how many lines are output at a time when
a large message is read. After n lines are printed, the message ―PRESS Q TO QUIT, C
FOR CONTINUOUS, RETURN FOR MORE‖ will appear. ‗Q' will abort the printout of
the message. ‗C' will cause the rest of the message to be printed without stopping.
Pressing RETURN will print the next n lines.
R(ead) n
79