Kantronics KPC–3 Plus User Manual page 110

Causes the KA-Node to initiate a disconnect.
Connect callsign [Stay]
Causes the node to issue a connect request to ―callsign‖ in the usual AX.25 mode. If the
connect is successful, a link will be made to the next node or end-user station called.
The optional Stay feature provides a way to disconnect without loosing the entire link.
Normally when a disconnect occurs, whether issued by you or by the remote station, the
connection to the KA-Node is also lost.
Using the Stay option allows you to stay connected to the KA-Node when the remote
station issues a disconnect.
Help
Causes the KA-Node to send a brief help list, showing all commands available, with the
options and a short description of each command.
Jheard [Short|Long]
Causes the KA-Node to transmit its MHEARD log. The returned list (without the short or
long option) may look like this:
(HF/VHF Multi-Port)
LAWKAN/H*
N66046/V
NØKN-3/H
NØGRG/V
(VHF/UHF Multi-Port)
LAWKAN/1*
N66046/2
NØKN-3/1
NØGRG/2
(Single-Port)
LAWKAN
N66046*
NØKN-3
NØGRG
The left column indicates the callsign (and SSID if appropriate) of a station heard. The
character following the slash (/) shows the port on which the station was heard (single
port TNCs don't include a ―/‖). The asterisk indicates the station was heard via a
digipeater. The center and right columns indicate date and time the station was last
heard. The last call on the list will probably be your call. The above JHEARD lists show
NØGRG connecting to the KA-Node.
The short (JHEARD S) version of this command would produce the same list, without
dates and times.
01/09/88 08:25:15
01/10/88 00:03:10
01/10/88 00:03:19
01/10/88 00:04:15
01/09/88 08:25:15
01/10/88 00:03:10
01/10/88 00:03:19
01/10/88 00:04:15
01/09/88 08:25:15
01/10/88 00:03:10
01/10/88 00:03:19
01/10/88 00:04:15
110