Package Contents; Additional Parts For Your Packet Radio Station - Kantronics KPC–3 Plus User Manual

serve as a digipeater for other stations
serve as a network node point for other stations, using KA-NODE and/or the
optional K-Net feature
And much more.

Package Contents

Check to see that you have the items listed below (later you will see how these items
are used in your system):
KPC-3 Plus unit
parts to use in assembling cabling
Male DSUB-9 connector for radio port
Metalized DSUB-9 back shell with hardware
3 foot (0.91 m) piece of 5-conductor shielded cable to connect the KPC-3
Plus to your radio
2.1 mm dc power connector
and, of course, this ―User's Guide‖ manual on a CD-ROM

Additional Parts for Your Packet Radio Station

In addition to your KPC-3 Plus unit, you will need the following parts to set up your
packet radio station:
An FM transceiver
A microphone (Mic) plug and/or mating accessory plug or external audio plug for
your radio
A computer with an RS232 serial port (or other RS232 terminal device)
A serial modem cable, used to connect the KPC-3 Plus to your computer
A 12 V dc power supply or power adapter
(optionally) 9 V battery and battery clip (not supplied, you must install)
18