Kantronics KPC–3 Plus User Manual page 150

When you are at the Command Mode prompt, you enter a command for the KPC-3 Plus
by typing the command name (in upper or lower case) and any required and optional
parameter values (argument settings or values).
The command name and each parameter value must be separated from each other
by at least one space.
To ENTER the command press the carriage return ―CR‖ (usually an ENTER key). As
soon as the ―CR‖ key is pressed, the KPC-3 Plus will process the command request and
take whatever action is specified (or inform you with an ―EH?‖ if it does not understand
what you have entered).
As noted above, you can enter the short-form of a command name—the characters
underlined in the listing.
The short form is not necessarily the shortest unique string in the name or the first
match in alphabetical order—rather it is the first match that the KPC-3 Plus will find as it
scans through the non-alphabetical listing of commands in its EPROM.
Hint: You can examine the value of any parameter by typing the command name
followed by a ―CR‖. A special command, DISPLAY, allows you to see the values of
all parameters or groups of related parameters.
150