Onboard Fdc Controller; Onboard Serial Port - Acorp 7KT266A User Manual

Chapter 2 Chapter 2
Chapter 2 Chapter 2 Chapter 2
OnChip LAN Boot ROM
The Choices: Disabled(default), Enabled.
CMOS Setup Utility-Copyright (C) 1984-2001 Award Software

Onboard FDC Controller

Onboard Serial Port 1

Onboard Serial Port 2
UART Mode Select
RxD,TxD Active
IR Transmission Delay
UR2 Duplex Mode
Use IR Pins
Onboard Parallel Port
Parallel Port Mode
EPP Mode Type
ECP Mode Use DMA
Game Port Address
Midi Port Adress
Midi Port IRQ
←→↑↓: Move
Enter:Select
F1:General Help F5:Previous Values
F7:Optimized Defaults
Onboard FDC Controller
Enabled (default)
Disabled
Onboard Serial Port1
Select an address and corresponding interrupt for the first
and second serial ports.
The Choices: Auto(default), (3F8/IRQ4)Auto,
(2F8/IRQ3), (3E8/IRQ4), (2E8/IRQ3), Disabled.
Onboard Serial Port 2
Auto (default)
3F8/IRQ4
2F8/IRQ3
Super IO Device
Enabled
Auto
Auto
Normal
Hi,Lo
Enabled
Half
IR/Rx2Tx2
378/IRQ7
SPP
EPP1.7
3
201
330
10
+/-/PU/PD:Value F10:Save
F6:Fail-Safe Defaults
Enabled onboard FDC
Controller.
Disabled onboard FDC
Controller.
BIOS will automatically setup
the Serial Port 2 address.
Enabled onboard Serial Port 2
and address is 3F8.
Enabled onboard Serial Port 2
and address is 2F8.
2-21 2-21 2-21
2-21 2-21
BIOS Setup BIOS Setup
BIOS Setup BIOS Setup BIOS Setup
Item Help
Menu Level
ESC:Exit