Acorp 7KT266A User Manual page 49

Chapter 2 Chapter 2
Chapter 2 Chapter 2 Chapter 2
3E8/IRQ4
2E8/IRQ3
Disabled
UART Mode Select
This item allows you to select which Infra Red(IR)
function of the onboard I/O chip you wish to use.
The Choices: Normal(default), IrDA, SCR, ASKIR.
UR2 Duplex Mode
This item allows you to select which Infra Red(IR)
function of the onboard I/O chip you wish to use.
The Choices: Half(default), Full.
Onboard Parallel Port
This item allows you to select the I/O address with which
to access the onboard parallel port controller.
Disabled.
378/IRQ7. (default)
278/IRQ5.
3BC/IRQ7.
Parallel Port Mode
SPP (default)
EPP
ECP
ECP/EPP
Game Port Address
201 (default)
209
Disabled
Enabled onboard Serial
Port2 and address is 3E8.
Enabled onboard Serial
Port2 and address is 2E8.
Disabled.
Using Parallel port as Standard
Parallel Port.
Using Parallel port as Ex-
hanced Parallel Port.
Using Parallel port as Ex-
tended Capabilites Port.
Using Parallel port as
ECP/EPP mode.
Set onboard game port to 201.
Set onboard game port to 209.
Disabled.
2-22 2-22 2-22
2-22 2-22
BIOS Setup BIOS Setup
BIOS Setup BIOS Setup BIOS Setup