Acorp 7KT266A User Manual page 54

Chapter 2 Chapter 2
Chapter 2 Chapter 2 Chapter 2
LPT & COM
When set to On, any event occurring at a COM(serial) /
LPT (printer) port will awaken a system which has been
powered down.
HDD & FDD
When set to On(default), any event occurring at a hard or
floppy drive will awaken a system which has been powered
down.
PCI Master
When set to On, any event occurring at a PCI port will
awaken a system which has been powered down.
Modem Ring Resume
To use this function, you need a LAN add-on card which
supports power on function. It should also support the
wake-up on LAN jump. The Choices: Disabled(default).
RTC Alarm Resume
When "Enabled", you can set the date and time at which the
RTC (real-time clock) alarm awakens the system from
Suspend mode.
CMOS Setup Utility-Copyright (C) 1984-2001 Award Software
IRQs Activity Monitoring
Primary INTR
IRQ 3 (COM2)
IRQ 4 (COM1)
IRQ 5 (LPT2)
IRQ 6 (Flppy Disk)
IRQ 7 (LPT1)
IRQ 8 (RTC Alarm)
IRQ 9 (IRQ2 Redir)
IRQ 10 (Reserved)
IRQ 11 (Reserved)
IRQ 12 (PS2/Mouse)
IRQ 13 (Coprocessor)
IRQ 14 (Hard Disk)
IRQ 15 (Reserved)
←→↑↓: Move
Enter:Select
F1:General Help F5:Previous Values
F7:Optimized Defaults
ON Item Help
Enabled
Enabled Menu Level
Enabled
Enabled
Enabled
Disabled
Disabled
Disabled
Disabled
Enabled
Enabled
Enabled
Disabled
+/-/PU/PD:Value F10:Save ESC:Exit
F6:Fail-Safe Defaults
2-27 2-27 2-27
2-27 2-27
BIOS Setup BIOS Setup
BIOS Setup BIOS Setup BIOS Setup