Onboard Fdc Controller; Onboard Serial Port; Onboard Serial Port 2; Uart Mode Select - Acorp 4PM266M User Manual

Bhapter 1 Bhapter 1
Bhapter 1 Bhapter 1 Bhapter 1
CMOS Setup Utility-Copyright (C) 1984-2001 Award Software

Onboard FDC Controller

Onboard Serial Port 1

Onboard Serial Port 2

UART Mode Select

RxD,TxD Active
IR Transmission Delay
UR2 Duplex Mode
Use IR Pins
Onboard Parallel Port
Parallel Port Mode
EPP Mode Type
ECP Mode Use DMA
Game Port Address
Midi Port Adress
Midi Port IRQ
←→↑↓: Move
F1:General Help
F7:Optimized Defaults
Onboard FDC Controller
Enabled (default)
Disabled
Onboard Serial Port1
Select an address and corresponding interrupt for the first
and second serial ports.
The Choices: 3F8/IRQ4(default), Auto, (3F8/IRQ4),
(3E8/IRQ4), (2E8/IRQ3), Disabled.
Onboard Serial Port 2
Select an address and corresponding interrupt for the first
and second serial ports.
The Choices: 2F8/IRQ3(default), Auto, (2F8/IRQ3),
(3E8/IRQ4), (2E8/IRQ3), Disabled.
UART Mode Select
This item allows you to select which Infra Red(IR)
function of the onboard I/O chip you wish to use.
Super IO Device
Enabled
3F8/IRQ4
2F8/IRQ3
Normal
Hi,Lo
Enabled
Half
IR-Rx2Tx2
278/IRQ5
SPP
EPP1.7
3
201
330
10
Enter:Select +/-/PU/PD:Value
F5:Previous Values
Enabled onboard FDC
Controller.
Disabled onboard FDC
Controller.
1 - 1 1 1 - 1 1 1 - 1 1
1 - 1 1 1 - 1 1
Item Help
Menu Level
F10:Save ESC:Exit
F6:Fail-Safe Defaults
BIOS Settp BIOS Settp
BIOS Settp BIOS Settp BIOS Settp