Onboard Fdc Controller - Acorp 4S845AL User Manual

Bhapter 1 Bhapter 1
Bhapter 1 Bhapter 1 Bhapter 1

Onboard FDC Controller

Enabled (default)
Disabled
Onboard Serial Port1
Select an address and corresponding interrupt for the first
and second serial ports.
The Choices: 3F8/IRQ4(default), Auto, (2F8/IRQ3),
(3E8/IRQ4), (2E8/IRQ3), Disabled.
Onboard Serial Port 2
Auto
3F8/IRQ4
2F8/IRQ3 (default)
3E8/IRQ4
2E8/IRQ3
Disabled
UART Mode Select
This item allows you to select which Infra Red(IR)
function of the onboard I/O chip you wish to use.
The Choices: Normal(default), IrDA, SCR, ASKIR.
UR2 Duplex Mode
This item allows you to select which Infra Red(IR)
function of the onboard I/O chip you wish to use.
The Choices: Half (default), Full.
ECP Mode Use DMA
The Choices: 3(default), 1.
Enabled onboard FDC
Controller.
Disabled onboard FDC
Controller.
BIOS will automatically setup
the Serial Port 2 address.
Enabled onboard Serial Port 2
and address is 3F8.
Enabled onboard Serial Port 2
and address is 2F8.
Enabled onboard Serial Port 2
and address is 3E8.
Enabled onboard Serial Port 2
and address is 2E8.
Disabled.
1 - 1 1 1 - 1 1 1 - 1 1
1 - 1 1 1 - 1 1
BIOS Settp BIOS Settp
BIOS Settp BIOS Settp BIOS Settp