Table of Contents
Advertisement
Chapter 2
Chapter 2
Chapter 2
Chapter 2
Chapter 2
Modem Use IRQ
This determines the IRQ, which can be applied in Modem
use.
3(default)
4/5/7/9/10/11/NA
Soft-Off by PWRBTN
Pressing the power button for more than 4 seconds forces
the system to enter the Soft-Off state when the system has
"hung".
The Choices: Instant-Off(default), Delay 4 Sec.
PWRON After PWR-Fail
This option will determine how the system will power on
after a power failure.
The Choices: Off(default), On, Former-Sts.
CMOS Setup Utility-Copyright (C) 1984-2001 Award Software
IRQ / Event Activity Detect
PS2KB Wakeup Select
PS2KB Wakeup From S3/S4/S5
VGA
LPT & COM
HDD & FDD
PCI Master
PowerOn by PCI Card
Modem Ring Resume
RTC Alarm Resume
Date (of Month)
Resume Time (hh:mm:ss)
IRQs Activity Monitoring
←→↑↓: Move
Enter:Select
F1:General Help
F5:Previous Values
F7:Optimized Defaults
IRQ / Event Activity Monitoring
If you highlight the "Press Enter" next to the "Wake Up
Events" label and then press the enter key, it will take you
to a submenu with the following options:
VGA
When set to On, any event occurring at a VGA port will
awaken a system which has been powered down.
Hot Key
Item Help
Disabled
OFF
Menu Level
LPT/COM
ON
OFF
Disabled
Disabled
Disabled
0
0 0 0
Press Enter
+/-/PU/PD:Value
F10:Save
ESC:Exit
F6:Fail-Safe Defaults
2-26
2-26
2-26
2-26
2-26
BIOS Setup
BIOS Setup
BIOS Setup
BIOS Setup
BIOS Setup
Advertisement
Table of Contents
