Acorp 7KT266A User Manual page 50

Chapter 2 Chapter 2
Chapter 2 Chapter 2 Chapter 2
Midi Port Address
300
330 (default)
290
Disabled
Midi Port IRQ
10 (default)
5
Init Display First
PCI Slot (default)
AGP
Onchip USB Connector
This should be enabled if your system has a USB installed
on the system board and you wish to use it. Even when so
equipped, if you add a higher performance controller, you
will need to disable this feature.
The Choices: All Enabled(default), All Disabled, 1&2
USB Port, 2&3 USB Port, 1&3 USB Port, 1 USB Port, 2
USB Port, 3 USB Port.
USB Keyboard Support
Select Enabled if your system contains a Universal Serial
Bus(USB) controller and you have a USB keyboard.
The Choices: Disabled(default), Enabled.
IDE HDD Block Mode
Enabled (default)
Disabled
Set Midi Port address to 300.
Set Midi Port address to 330.
Set Midi Port address to 290.
Disabled.
Set Midi Port IRQ to 10.
Set Midi Port IRQ to 5.
Set Init Display First to PCI
Slot.
Set Init Display First to
onboard AGP.
Enabled.
Disabled.
2-23 2-23 2-23
2-23 2-23
BIOS Setup BIOS Setup
BIOS Setup BIOS Setup BIOS Setup