Acorp 7KT266A User Manual page 23

Chaosdr 1 Chaosdr 1
Chaosdr 1 Chaosdr 1 Chaosdr 1
1.8 DDR DRAM Installation
1.8.1 DDR
DDR DRAM Access Time: 2.5V Unbuffered PC1600/
PC2100 Type required.
DDR DRAM Type: 64MB, 128MB, 256MB, 512MB, 1GB
DDR Module. (184 pin)
Bank
DDR 1
( Bank 0-1 )
DDR 2
( Bank 2-3 )
DDR 3
( Bank 4-5 )
1.8.2 How to install a DDR Module
1. The DDR socket has a "Plastic Safety Tab" and the DDR
memory module has an "asymmetrical notch", so the DDR
memory module can only fit into the slot in one direction.
2. Push the tabs out. Insert the DDR memory modules
into the socket at a 90-degree angle then push down
vertically so that it will fit into place.
3. The Mounting Holes and plastic tabs should fit over the
edge and hold the DDR memory modules in place.
Memory module
64MB, 128MB, 256MB, 512MB, 1GB
184 pin, 2.5V DDR DRAM
64MB, 128MB, 256MB, 512MB, 1GB
184 pin , 2.5V DDR DRAM
64MB, 128MB, 256MB, 512MB, 1GB
184 pin, 2.5V DDR DRAM
Total System Memory (Max 3GB)
80 pins
1 - 1 0 1 - 1 0 1 - 1 0 1 - 1 0 1 - 1 0
Mnshdranarc Cdrbrhoshnn Mnshdranarc Cdrbrhoshnn
Mnshdranarc Cdrbrhoshnn Mnshdranarc Cdrbrhoshnn Mnshdranarc Cdrbrhoshnn
104 pins