Acorp 7KT266A User Manual page 39

Chapter 2 Chapter 2
Chapter 2 Chapter 2 Chapter 2
Swap Floppy Drive
If the system has two floppy drives, you can swap the
logical drive name assignments.
The Choices: Disabled(default), Enabled.
Boot Up Floppy Seek
Seek disk drives during boot up. Disabled speeds boot-up.
The Choices: Disabled(default), Enabled.
Boot Up NumLock Status
Select power on state for Numlock.
On (default)
Off
Gate A20 Option
Select if chipset or keyboard controller should control
Gate A20.
Normal
Fast (default)
Typematic Rate Setting
Enabled
Disabled (default)
Typematic Rate (Char/Sec)
Range between 6(default) and 30 characters per second.
This option controls the speed of repeating keystrokes.
Typematic Delay (Msec)
This option sets the time interval for displaying the first
and the second characters.
The Choices: 250(default), 500, 750, 1000.
Numpad is number keys.
Numpad is arrow keys.
A pin in the keyboard
controller controls Gate A20.
Lets chipset control Gate A20.
Enabled this option to adjust
the keystroke repeat rate.
Disabled.
2-12 2-12 2-12
2-12 2-12
BIOS Setup BIOS Setup
BIOS Setup BIOS Setup BIOS Setup